Plastics and Graphics, Inc. Palm Bay, Florida : MATERIALS ACRYLIC

Engraving

Materials

Services

Signs

Materials Index

Welcome to our material page. Due to the weight, it is not cost effective to ship sheets larger than 24"x48" outside of Brevard County, Florida.

We also have many other services and already fabricated products. You can review them using the buttons shown above.

**ACRYLIC ANGLE & CHANNEL**
Angle Stock
	90 degree Angle stock is commonly used for indoor wall corner protection in high traffic areas. It is inexpensive and can be replaced every year for a fresh home look. Inside dimensions in inches: 7/8" x 7/8" x 8' long.
U-Channel Stock
	U-Channel stock is commonly used for panel edge reinforcement, protection and finishing. Inside dimensions in inches: 1/4" opening x 1/2" x 8'long 3/8" opening x 1/2" x 8' long
back to top

**ACRYLIC SHEETS CLEAR COLORLESS**
Clear colorless Acrylic Sheets 4'x8' or by the squre feet. Oversize sheets (larger than 4'x8') are available. Thickness (nominal inch): 1/16, 1/10, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 and 2
back to top

**ACRYLIC HASPS & HINGES**
Hasps
	W: 0.875" D: 2.625" Thickness: 0.125 Clear, white, grey, black.
Hinge, Small
	Clear W:1.5" D:1.5" Thick: 0.16 Also available in 12" length;
Key-Hole Type Hanger
	H:1.25" W:1.25" Thick: 0.187" Max screw head size :0.375 Max screw shank size: 0.187 Clear, white, black
2-Plate Hinge
	H: 1.25" Tab depth: 0.5" Holds 1/4 " thick sheet Use any material as hinge pin
3-Plate Hinge
	H: 1.25" Tab depth: 0.5" Holds 1/4 " thick sheet Use any material as hinge pin
4-Plate Hinge
	H: 1.25" Tab depth: 0.5" Holds 1/4 " thick sheet Use any material as hinge pin
Continuous Hinge
	W:1.375" L: 48" in Thickness: 0.187" Urethane/acrylic construction
back to top

**ACRYLIC MIRRORS CLEAR COLORLESS**
4'x8', or by the square feet. Shatter resistant, acrylic mirrors are half the weight of glass and are curvable for special effects. Color tinted mirrors are available by special order. Thickness (nominal inch): 1/8, 1/4
back to top

**ACRYLIC RODS & TUBES**
Rods
	6' Long - availble cast or extruded, round and square rods have excellent optical clarity. Triangle, half-round and other profiles (e.g. spiral) are available by special order. Diameters are in inches. Extruded: 1/8 - 11 1/2 Cast: 1/2 - 3 1/2
Tubes
	6' Long Cast or extruded the tubes are crystal clear and availble in a wide range of of wall thicknesses. Commonly requested 1/8 and 1/4 wall thicknesses are in stock. Diameters are in inches O.D. Extruded: 1/8 - 5 3/4 Cast: 1/2 - 15
back to top

**ACRYLIC OTHER TYPES**
White & Color, opaque or translucent	Thickness (nominal inch): 1/6, 3/16, 1/4, 1/2
Non-glare	Thickness (nominal inch): 1/8, 1/4
Textured DP-30	Thickness (nominal inch): 1/8, 1/4
UV-Transparent (UVT)	Thickness (nominal inch): 1/8, 1/4
UV-Filtering (UVF)	Thickness (nominal inch): 1/8
Eggcrate Light Panel	Thickness (nominal inch): 1/2
Prismatic - LP	Thickness (nominal inch): 1/10
Cracked Ice- LP	Thickness (nominal inch): 1/10
back to top

**PVC Type I & II GRAY**
Type I & II Gray 55" x 100" sheets. Type I is highly corrosion resistant to acids and alkalis. Type II has high impact resistance. We sell these in full sheets, half sheets or by the square foot. Thickness (inches): 0.125, 0.1875, 0.25, 0.375, 0.5, 0.75, 1.0, 1.25, 1.5, 2.0
back to top

**PVC THIN GAUGE**
Thin Gauge 21" x 51" sheets Our customers have found hundreds of uses for this material. It has good transparency and stiffness but is still flexible and soft enough to be cut with scissors or razor knife. It can be heat formed at home and assembled with glue or PVC cement. These sheets have a slight bluish tint. Thickness (inches): 0.015 matte or glossy 0.030 glossy 0.040 glossy
back to top

**VINYL FILM**
54" Wide rolls. It can stretch and return to its original shape after a short time. Vinyl film can be sewn, cemented, heat sealed and laminated. It comes in rolls and is sold by the foot. Great for inexpensive interior window insulation! or... tablecloth protective cover! Thickness (nominal inch): 0.006
back to top

**PVC KOMATEX**
	Rigid Foam Sheets. Komatex is remarkably light in weight, rigid and hard surfaced. It is the easiest of all PVC products to be heat formed because of its low density. Its surface is textured to resemble fine leather grain. Komatex is available in 12 colors and priced by the sheet or by the square foot. Thickness (nominal inch): 0.006, 1/8, 1/4, 1/2 Colors: White, Black, Lt.Gray, Dk.Gray, Blue, Dk.Blue, Yellow, Dk.Yellow, Red, Green, Beige, Brown
back to top

**PVC VERSACEL (EXPANDED FOAM BOARDS)**
	Available in 4' x 8' sheets. Versacel is a rigid PVC foam board harder than Komatex. It is worked easily with hand tools. Ideal for displays and models. Call for colors available in stock. If we don't have it we can get it. Available widths: 2"-39", 48", 60" Thickness (nominal mm): 1 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 10 mm, 13 mm
back to top

**ABS SHEETS**
Sheets sold by the square foot. Thicknesses (nominal inch): 1/16, 1/8, 1/4
back to top

**COROPLAST SHEETS**
4' x 8' sheets. Minimum amount sold: 1/2 sheet. Thickness (nominal in): 4 mm (3/16"), 6 mm (1/4") Colors: White, Black Special order: Yellow, Orange, Red, Brown, Green, Dk. Blue, Lt. Blue, Silver, Cream
back to top

**DELRIN SHEETS**
4' x 8' sheets. Minimum amount sold: 12" x 12". Colors available: Natural, Black Thickness (nominal inch): 1/8, 3/16, 1/4, 3/8, 1/2, 5/8, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/4, 2 1/2, 3, 3 1/2, 4
back to top

**OTHER MATERIALS AVAILABLE**
Nylon Rods & Sheets PETG Sheet Phenolic Sheet Polycarbonate: Sheet, Rod & Twin Wall Polyethylene: Sheet, UHMW (Ultra High Molecular Weight)Polypropylene: Sheet & Rod Styrene (high impact) Teflon: Sheet & Rod
back to top